Landlords must install smoke alarms
From 1 May 2006, it is a term of every residential tenancy agreement that the landlord will install and maintain smoke alarms according to the standards in the Environmental Planning and Assessment Regulation 2000.
Types of buildings and types of alarms
All smoke alarms installed from 1 May 2006 must comply with Australian Standard AS 3786. The power supply and location of smoke alarms depends on the type of building.
- detached houses, terrace houses, town houses and villas
- apartments, units and flats
- caretakers flats and flats above shops
- relocatable homes.
Alarms must be hard-wired to mains electricity supply or battery powered (landlord’s choice). They must be installed on every storey. On storeys with bedrooms, an alarm must be located on or near the ceiling in every corridor associated with a bedroom.The landlord may have to install one or more alarms. On storeys without bedrooms, a smoke alarm must be installed in the path of travel that people would likely take to evacuate the building.
Smoke alarms must be hard-wired to mains electricity supply, or powered by a non-removable 10-year longlife battery (landlord’s choice). They must be installed on every storey. On storeys with bedrooms, a smoke alarm must be installed in each bedroom, and in each corridor associated with bedroom.
On storeys without bedrooms, a smoke alarm must be installed in the path of travel that people would likely take to evacuate the building. There are additional requirements and standards for smoke alarms in large boarding houses (‘Class 3’ buildings). See the NSW Department of Planning website(www.planning.nsw.gov.au) for more information.
Old smoke alarms
Smoke alarms installed before 1 May 2006 are not required to comply with Australian Standard AS 3786.
However, if the alarm is not located as required by the regulation, the landlord must move it or install a new one. If an old alarm stops working or is removed, the landlord must replace it with an alarm that complies with the standard. Interfering with a smoke alarm It is a term of every residential tenancy agreement that neither the landlord nor the tenant shall interfere with the operation of a smoke alarm.
If a smoke alarm gives ‘false alarms’ (e.g. triggered by cooking), do not remove the battery or disable it. Contact the landlord/agent and ask that the alarm be moved to a more suitable location or replaced with a different style of alarm. See the NSW Fire Brigades website (www.fire.nsw.gov.au) for more information.
It is a term of every residential tenancy agreement that the tenant is responsible for replacing batteries in any smoke alarms during the tenancy. Landlord’s access to premises A landlord/agent/contractor, having given 2 days notice, can enter premises to:
- install smoke alarms
- maintain and repair smoke alarms.
You can apply to the Consumer, Trader and Tenancy Tribunal (CTTT) for an order for the landlord to:
- install smoke alarms
- maintain and repair smoke alarms
- stop interfering with the operation of a smoke alarm.
The landlord can also apply to the Consumer Trader and Tenancy Tribunal for an order if you interfere with the operation of a smoke alarm or refuse to change the battery.
Repair of replacement of a smoke alarm can be an urgent repair – see Factsheet: Repairs and maintenance.
Alarms for people with hearing impairment The smoke alarms required by the regulation issue an audible alarm. Devices such as flashing lights and vibrating pillow pads can be connected to some smoke alarms. Ask your landlord to install an alarm compatible with these devices.
Contacts and further information
- NSW Department of Planning: Smoke Alarms Help Line 1300 858 812
- NSW Fire Brigades: www.fire.nsw.gov.au
Information supplied courtesy of the Tenants Union of NSW
Further information and advice for NSW tenants can be sourced from www.tenants.org.au